|1999-2006 Chevrolet Silverado Suburban|
First thing you need to do is check out how Spyder projectors change the look of your Suburban. Start by opening the hood. You'll need to unlock and remove the two retainer stakes that secure the headlight to the body. Rotate the stake out of the holder, then just pull up to free it.
With the stakes removed, now we can unseat the headlight. Disconnect the high beam harness, then disconnect the low-beam harness. We have to transfer a few things before we continue. Take a look at the back side of your OEM headlight. Remove the high beam bulb from the OEM headlight.
Never touch exposed bulbs with bare hands. Inspect the bulb gasket before we transfer it over. Replace the gasket if it's worn. Now locate your Snyder headlight. Take a look at its back side. Install the high beam bulb into your Spyder headlight.
These are your headlight beam adjusters locations. They are eight millimeter. For information on how to wire the HALOs and more, check out the FAQs playlist on the Spyder Auto YouTube channel. Now we're ready to install our Spyder headlight.
Reconnect the high beam harness, then reconnect the low beam harness. Then go ahead and seat the Spyder headlight, taking care not to pinch the harness between the headlight and the body. Now we'll reinstall the two retainer stakes to secure the headlight.
Then just close the hood, and you're done. Congratulations, you've fitted your Suburban with a set of stylish projector headlights from Spyder Auto. This is the actual projector cutoff line. Announcer: Brought to you by Jegs. Fast delivery. Your source for high performance and quality. Delivering performance since 1960.